Síganos:
Teléfono: +1 951 565 7769
CORREO ELECTRÓNICO: [email protected]

FanBrain™– Next-Generation HVLS Control System

Developed by Vindus, FanBrain is a state-of-the-art intelligent control system designed for HVLS fans, delivering automation, convenience, and energy efficiency.

compartir:
Detalles del producto
Display Resolution Brightness Backlight LCD Lifetime Touch Panel CPU Storage RTC Ethernet SD Card Bluetooth USB Port Program Download Method Serial Port LCD Viewing Angles (T/B/L/R) Rated Power Rated Voltage Power Protection Power Interruption CE&RoHS Operating Temperature Storage Temperature UV Resistance Environmental Humidity Vibration Endurance Método de refrigeración Protection Level Enclosure Material Cutout Dimensions Dimensions Peso
10.1” 16:9 TFT LCD 1024×600 400 cd/m² LED 50000 hours 4-wire industrial resistive touch panel Cortex-A7(main frequency is 1GHz,dual-core) 256MB DDR3+4GB eMMC Built-in 1* 10M/100M self-adaptive RJ45 port NA NA 1*Type-C 2.0 port;1*USB Type-A 2.0port USB Slave/U disk/Ethernet COM1:RS232/RS485/RS422
COM2: RS485
COM3:RS232
85°/85°/85°/85° <10W DC24V,operational range:DC 9V~28V Lightning surge protection <5ms EN61000-6-2:2005 and EN61000-6-4:2007 standards certified;
RoHS certified;lightning surge±1kV;
group pulse±2kV;electrostatic contact 4kV,air discharge
8kV
0~50℃ ‘- 20~60 ℃ Operating in high UV environment is prohibited(e.g.,in
direct sunlight)
10%~90%  RH (non-condensing) 10~25Hz  (X/Y/Z direction, 2G/30 minutes) Natural air cooling Front:IP65                   (with flush panel cabinet
installation),  Rear:IP20
Engineering plastic 260mm×202mm 273mm×213mm×36mm About 920 g
Características
66

1. Centralized Control

  • Control up to 10 fans from a single 10-inch HMI touchscreen.
  • Manage ON/OFF, forward/reverse rotation, and speed adjustments effortlessly.
  • Schedule fans to start or stop automatically based on preset timelines, rotation directions, and speeds.
  • Set countdown timers for automatic shutdown.

2. Intelligent Temperature-Based Operation

  • Integrates with temperature sensors to monitor ambient conditions.
  • Fans turn ON when the temperature exceeds the setpoint and OFF when it drops below. Different temperature levels correspond to different fan speeds.
  • With two sensors installed (roof & floor) and thermal recovery enabled, the fan automatically reverses when the temperature difference reaches the preset value.

3. Flexible Connectivity

  • Supports Modbus-RTUcommunication protocol.
  • Offers both wired (RJ485) and wireless connectivity—wireless option eliminates wiring complexity.
  • Supports integration with BMS (Building Management System).

4. Group Control

  • Organize fans into groups by area or workshop for independent zone control.

5. Multi-Language Support

  • Supports English and Chinese with one-click language switching.
Pregunte ahora

Si tienes alguna duda o necesidad sobre el producto, por favor rellena el siguiente formulario y nos pondremos en contacto contigo lo antes posible.