folgen Sie uns:

FanBrain™– Next-Generation HVLS Control System

Developed by Vindus, FanBrain is a state-of-the-art intelligent control system designed for HVLS fans, delivering automation, convenience, and energy efficiency.

Aktie:
Produktdetails
Display Resolution Brightness Backlight LCD Lifetime Touch Panel CPU Storage RTC Ethernet SD Card Bluetooth USB Port Program Download Method Serial Port LCD Viewing Angles (T/B/L/R) Rated Power Rated Voltage Power Protection Power Interruption CE&RoHS Operating Temperature Storage Temperature UV Resistance Environmental Humidity Vibration Endurance Methode der Kühlung Protection Level Enclosure Material Cutout Dimensions Dimensions Gewicht
10.1” 16:9 TFT LCD 1024×600 400 cd/m² LED 50000 hours 4-wire industrial resistive touch panel Cortex-A7(main frequency is 1GHz,dual-core) 256MB DDR3+4GB eMMC Built-in 1* 10M/100M self-adaptive RJ45 port NA NA 1*Type-C 2.0 port;1*USB Type-A 2.0port USB Slave/U disk/Ethernet COM1:RS232/RS485/RS422
COM2: RS485
COM3:RS232
85°/85°/85°/85° <10W DC24V,operational range:DC 9V~28V Lightning surge protection <5ms EN61000-6-2:2005 and EN61000-6-4:2007 standards certified;
RoHS certified;lightning surge±1kV;
group pulse±2kV;electrostatic contact 4kV,air discharge
8kV
0~50℃ ‘- 20~60 ℃ Operating in high UV environment is prohibited(e.g.,in
direct sunlight)
10%~90%  RH (non-condensing) 10~25Hz  (X/Y/Z direction, 2G/30 minutes) Natural air cooling Front:IP65                   (with flush panel cabinet
installation),  Rear:IP20
Engineering plastic 260mm×202mm 273mm×213mm×36mm About 920 g
Merkmale
66

1. Centralized Control

  • Control up to 10 fans from a single 10-inch HMI touchscreen.
  • Manage ON/OFF, forward/reverse rotation, and speed adjustments effortlessly.
  • Schedule fans to start or stop automatically based on preset timelines, rotation directions, and speeds.
  • Set countdown timers for automatic shutdown.

2. Intelligent Temperature-Based Operation

  • Integrates with temperature sensors to monitor ambient conditions.
  • Fans turn ON when the temperature exceeds the setpoint and OFF when it drops below. Different temperature levels correspond to different fan speeds.
  • With two sensors installed (roof & floor) and thermal recovery enabled, the fan automatically reverses when the temperature difference reaches the preset value.

3. Flexible Connectivity

  • Supports Modbus-RTUcommunication protocol.
  • Offers both wired (RJ485) and wireless connectivity—wireless option eliminates wiring complexity.
  • Supports integration with BMS (Building Management System).

4. Group Control

  • Organize fans into groups by area or workshop for independent zone control.

5. Multi-Language Support

  • Supports English and Chinese with one-click language switching.
Jetzt anfragen

Wenn Sie Fragen oder Wünsche zum Produkt haben, füllen Sie bitte das folgende Formular aus und wir werden uns so schnell wie möglich mit Ihnen in Verbindung setzen.